Why did my bissel pro heat steam cleaner stop spraying water from the attachment? - what soap can i use in bissel carpet cleaner
I completely clean the underside of each cleaner.even manufacture of face to face and clean. the belt is clean, so do not know where to check. The Flow Indicator is moving very slowly. and when I see what comes of it, it does not seem to have soap.
Monday, January 25, 2010
What Soap Can I Use In Bissel Carpet Cleaner Why Did My Bissel Pro Heat Steam Cleaner Stop Spraying Water From The Attachment?
3 comments:
Check to ensure selector lever to ensure that the position of the attachment was changed and not the position of the soil. Then you should take the valve in the holding tank is flat and not in the UP or stuck closed. This is the external tank. Do not fill in the bubble of hot water. Do not forget the dirt and dust from the tank after emptying waste and rinse before filling in the interior of the bladder. After you ensure that the soap reservoir, located on the back of the machine is full of himself. Well, if all that is beautiful, use exhaust soap? It is a low soap soap and water can form directly, but it is not. Shampoo carpets regularly fluffy and can clog things or keep things up. When configured with foaming mouthwash to finish the job. One last thing, ensure that the switch position of cleaning level in the soil hard, regular, light or rinsing. Also attached you try to use? Try the tool out of you and tell you if the water flow or not. Spare no brush or move in order to hide problems. Only a tube directly into the tip of the CRevis tools. The turbo brush, I put too much of the factory, and I had to take it apart, grease the bushings, shafts and drive wheel, then, is not close to the pressure on the houses to each other, put together the union gears and shafts . Mine worked fine after that is the same for him. Good luck!
PS I love mine! Since the cleaning job I have on my carpet!
Give it a good cleaning action and check shoes and a potential problem or a ring. Lime can be in the hole in the tank and small holes in the spray is free.
probably the solution pump clogged or not. Probably at or below the tank of cleaning solution.
Post a Comment